顯示具有 Buying 標籤的文章。 顯示所有文章
顯示具有 Buying 標籤的文章。 顯示所有文章

2012年9月18日 星期二

Humidifier Buying Checklist


There are a few features that are essential to a useful humidifier while others can be completely optional. It really depends on the reason you are looking for a humidifier but this is a simple checklist covering some of the basics which you can customize to your needs.

1. Humidity meter - A unit that allows the user to choose a desired humidity setting is very convenient to have since it can self-regulate. A humidifier with an auto shutoff feature when the target level is reached helps prevent over humidification. Over humidification can cause mold and mildew. The recommended relative humidity level is usually around 30% to 50%.

2. Low Water Indicator - Some humidifiers will have indicator lights to alert the user of changes in particular operating conditions. A low water indicator helps remind the user to refill the water tank as necessary. It is a waste of energy to run the unit on an empty tank. In the event that nobody is around to notice the indicator lights, some units offer auto shutoff when the water tank is empty.

3. Speed Settings and Noise Control - Most top brands today are very quiet but that might not be enough for some people who are disturbed by background noise, especially when trying to sleep at night. There isn't much you can do about a loud unit but if it offers speed settings, lowering the speed can reduce the amount of noise produced.

4. Unit Size - It makes no sense to buy a small table top unit if the purpose is to increase the humidity of a room the size of a concert hall. On the same note, there can be negative repercussions to operating a large unit in a small space. Determine whether you need a unit for the entire house or for just a room.

Those four items really cover the basics anyone would need to make an educated humidifier purchase. There are extra features offered by some models such as air purification, sterilization, or dehumidification but dedicated units for these functions will usually do a better job at their particular function. Nonetheless, some people enjoy the convenience of having these functions built in.




Visit the Best Humidifier Filters website to read more about replacement humidifier filters and the different types of humidifiers.





This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.

2012年9月10日 星期一

12 Must Know Things You Need To Know When Buying Hardwood Flooring!


I am about to reveal to you some key facts that hardwood flooring manufacturers do not tell you about and it could save you thousands of dollars on your next hardwood floor.

Being an owner of a third generation family flooring business, I have seen flooring stores come and go all the time. I have seen gimmicks and tricks from manufacturers, representing their flooring products with impressive statistics and new "technologies" to guide people into how "their" product is better than the next. Sometimes the changes in product are actually viable and do work, but others are just plain nonsense.

Let's talk about some things you may not know when it comes to hardwood flooring, both engineered and solid hardwood.

Did you know that wood flooring has a comfort level too? Wood flooring will perform best when the indoor environment in which it is to be installed has a relative humidity range of 35 to 55 percent and a temperature range from 60 to 80 degrees Fahrenheit. This is about the same comfort range that we as humans enjoy.

Let's talk about the first thing you must do as an installer and the home owner. Ready for this...READ THE INSTRUCTIONS FIRST! Before you go gung ho and rip open the boxes, as most men do, take 10 minutes and read the complete instructions for the material provided. There should be a copy that comes in every box of material. Sit back, have a beer, and READ!

Now that we have that clearly understood, you need to INSPECT to know what to EXPECT!

1. Acclimation: The moisture content of the wood and subfloor must be within 2-4 percentage points of each other and the subfloor must not exceed 12% moisture content. The farther the percentage points are away from the subfloor moisture percentage, the more problems you will have. For proper acclimation, material must achieve room temperature (65-80 degrees F) for 24 hours PRIOR to installation. This means that the heat has to be on and working way before you try to install the flooring. To get proper acclimation, store the material according to the manufacturer's directions. The instructions will specify whether to store opened or unopened and whether to store in the center of the room or at the edges. This leads into the next big topic of moisture content.

2. Moisture Content: What is the ideal moisture content of the actual hardwood product? Every manufacturer will very slightly, but the average approved moisture content in the hard wood flooring itself should be between 6-9%. For example, if the moisture content of the subfloor is 12% and the hardwood flooring is 9% there is a 3% difference between the two wood products, which is in the allowable tolerance of installation. Although some movement can be expected even in this range, dramatic expansion and contraction can happen outside of these measurements. There are several electronic moisture meters available on the market to test the moisture content of the hardwood and subfloor. These are generally a pin probe type meter and they can give you an immediate reading of your wood's moisture level. It is very important that it is set to the species of wood that you are installing and that you take moisture measurements from several boxes of material and from several areas of the subfloor throughout the area that is to be installed.

3. Climate Control: Climate control might be the single most common reason for customer dissatisfaction with their hardwood purchase. It is CRITICAL, that the proper temperature and humidity level be maintained throughout the life of the hardwood installation. Improper climate control will result in the material swelling in the summer and shrinking, or gapping, in the winter. Without proper climate control within the house, gapping and shrinking will definitely occur. In the Northwest we do not have a huge problem with this issue unless there is a device used in the home which dries out the air to an extreme amount like a wood stove. This is why a pot of water is ALWAYS recommended to be kept on the wood stove when using it as a heat source. The pot of water keeps moisture in the air. Special Note: Some products that are constructed with HDF cores, are more stable and less prone to expanding and contracting.

4. Floating Floors: A key thing people miss when installing floating floors is to allow for an expansion gap around the room. Just as real dimensional lumber expands and contracts, so does your floor. There must be enough space left at vertical surfaces, like walls and posts to allow for this movement. The larger the area the more space that is required. Rule #1 - Always leave the required expansion gap called for by the manufacturer. Rule #2 - If your installer says that it is not necessary, fire them and refer to rule number one.

You can cover all expansion gaps with wood wall base or quarter round wood trim or a combination of the two.

5. Expansion Joint: Expansion joints are almost always required between rooms, where a room meets a hall or in large expanses. You can use a "T" molding in these areas to allow for the floor expansion and contraction.

6. Moisture Control: Here is a big one! Moisture in the subfloor, called "hydrostatic pressure or vapor emissions", is a MAJOR reason for flooring failures. The subfloor is not to exceed 65% relative humidity. There are several moisture meters that can be used on the floor that provide accurate readings, or a calcium chloride test, used for "concrete floors". If your wood subfloor is above 12% with a meter, do not lay the floor. If your wood subfloor is above 12% then you have to find out why - it could be a new floor and just needs to dry out. If you have concrete floors, you have to find out the source of the moisture. If you still cannot figure out why the floor is above 12%, don't use hardwood. Period. I mean it...you will kick yourself. If your floor is OK to install, remember to always float an engineered floor over 8 mil plastic when going over concrete so as to eliminate and minimize water vapor coming through the concrete floor.

7. Glue down Flooring: In residential installations, most flooring that is engineered is either click together or tongue and grove. I don't think I, personally, would ever glue down an engineered floor. It is an acceptable way to install but I find that it is terrible to rip out years later. Either glue it together or click it together but don't glue it down to the subfloor unless you have a very specific reason to. I have seen more problems even stapling it down to the subfloor. Stapling down your engineered floor will just lead to squeaks and creeks that will drive you nuts. Pull out the instructions that you threw in the garbage and look up the manufacture's installation methods, then go file the instructions with your purchase receipt for future reference.

8. Nail Down Flooring: A very common mistake we have seen in solid flooring installations is proper nail length, gauge of the nail, and spacing between nails. Always refer to the manufacture and double check the subfloor thickness. When using a pneumatic nailer, pay close attention to proper PSI settings.

9. Natural Product Variations: One of the inherent beauties of hardwood is the differences between boards and how much or little they accept stain. No two pieces will ever be alike and that is one thing that makes wood flooring so luxurious and realistic compared to laminate flooring. Pay careful attention to the layout and selecting the color and grain of each board when you are working with the product. Work out of 4-5 boxes at a time when doing a layout, this will randomize any variations between boxes of hardwood.

10. Culled Material: In every natural product like wood, there will be some pieces that, while not defective, and within industry standards, are not what the consumer, you, wants visually. Generally allow for 5-10% waste factor on material. This means that you need to buy 5-10% more material then what your job physically measures out to be. Larger jobs of 1000+ sf could work with 5% while jobs under that square footage can figure 10%.

When buying material from the "Big Box" stores you have to keep in mind that when they purchase materials for a "stocking special" they purchase a product that they can sell at the lowest possible price to use in their ads. This means that the hardwood that they pick up is "Tavern Grade" which means it does not meet the specs of normal running line material. The product will have more voids, mis-filled holes in the face of the hardwood, warped boards both side to side and up and down, and broken toungs. This product will have a lot more waste factor to it, even as much as 20-25% compared to the professional flooring stores stocking inventory. Buyer beware, what you could think is saving you that 10% difference in price, could be costing you 20-25% more in having to buy more wood for the same size job. Oh, and by the way, always keep 1-3 full boxes of material for doing repairs. Do not return them to the store. You will NEVER be able to match the floor again should you need to. Paint would fall into this same realm of thinking. When you need to touch up a wall, they will NEVER be able to exactly match the color. In hardwood there is not only color to match but grain of the wood, board width, color and the number one factor, gloss level of the hardwood or "luster".

11. Scratches: All hardwoods scratch - it's a fact of life. You just cannot change it. You will scratch, scuff, and dent your hardwood under the right conditions. Scratches occur more frequently under chair legs that are small in diameter and at entry areas where abrasion dirt is tracked in on the bottom of shoes. The industry has developed more scratch resistant surfaces like those containing aluminum oxide, they tend to show less scratching but the wood still dents under pressure. To help save your floors use felt chair protectors under all of your free standing chairs. Area rugs are great for rolling chairs in the kitchen, or replace the cheap plastic wheels with rubber barrel casters. The more expensive casters will spread the weight of the chair out more efficiently. The best first line of defense is an area rug by the front door or a tiled entry way to catch the dirt and sand "before" it gets dragged across the hardwood floors. Good rules of thumb, shoes get checked at the door.

12. Cleaning: For heaven sakes ask a flooring professional! Your wood floors are tough but they are delicate when it comes to moisture and cleaners. Throughout this article we have talked about moisture, now we don't want to ruin the floor by trying to maintain it improperly. Follow the manufacturer's instructions.

DO NOT: Use a wet mop system, a steamer, a bucket and mop, any "Wax" finish, no soaps, no polishes, and for heaven's sakes do not over wet your floor with a wet mop.

The best way to clean your floor is to use a microfiber mop and spray a professional hardwood cleaner onto the mop head, to dampen the head, and then clean your floor. If you see streaking or a wet trail, you have used too much cleaner and immediately wipe up the excess with a terry cloth towel.

If you treat your hardwood floors with the love you would treat your wood dining room table, you will be happy for years to come.




For more information visit http://www.yourfloortrader.com By: Dean Paulson, Owner
The Floor Trader of Tacoma - The Floor Trader of Lacey - Floor Decorators Carpet One
"Family Owned and Operated Since 1921"

Written By: Dean Paulson, Owner and Manager

Dean Paulson is one of the third generation family members who is involved in the day to day operations and management of The Floor Trader of Tacoma, The Floor Trader of Lacey and Floor Decorators Carpet One in Bremerton. Since 1921, the Paulson family has owned and operated professional floor covering stores for the last 90 years, if you want to know the truth in flooring, then you have found the right company to work with.

Visit Us Now At: http://www.YourFloorTrader.com





This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.

2012年6月20日 星期三

12 Must Know Things You Need To Know When Buying Hardwood Flooring!


I am about to reveal to you some key facts that hardwood flooring manufacturers do not tell you about and it could save you thousands of dollars on your next hardwood floor.

Being an owner of a third generation family flooring business, I have seen flooring stores come and go all the time. I have seen gimmicks and tricks from manufacturers, representing their flooring products with impressive statistics and new "technologies" to guide people into how "their" product is better than the next. Sometimes the changes in product are actually viable and do work, but others are just plain nonsense.

Let's talk about some things you may not know when it comes to hardwood flooring, both engineered and solid hardwood.

Did you know that wood flooring has a comfort level too? Wood flooring will perform best when the indoor environment in which it is to be installed has a relative humidity range of 35 to 55 percent and a temperature range from 60 to 80 degrees Fahrenheit. This is about the same comfort range that we as humans enjoy.

Let's talk about the first thing you must do as an installer and the home owner. Ready for this...READ THE INSTRUCTIONS FIRST! Before you go gung ho and rip open the boxes, as most men do, take 10 minutes and read the complete instructions for the material provided. There should be a copy that comes in every box of material. Sit back, have a beer, and READ!

Now that we have that clearly understood, you need to INSPECT to know what to EXPECT!

1. Acclimation: The moisture content of the wood and subfloor must be within 2-4 percentage points of each other and the subfloor must not exceed 12% moisture content. The farther the percentage points are away from the subfloor moisture percentage, the more problems you will have. For proper acclimation, material must achieve room temperature (65-80 degrees F) for 24 hours PRIOR to installation. This means that the heat has to be on and working way before you try to install the flooring. To get proper acclimation, store the material according to the manufacturer's directions. The instructions will specify whether to store opened or unopened and whether to store in the center of the room or at the edges. This leads into the next big topic of moisture content.

2. Moisture Content: What is the ideal moisture content of the actual hardwood product? Every manufacturer will very slightly, but the average approved moisture content in the hard wood flooring itself should be between 6-9%. For example, if the moisture content of the subfloor is 12% and the hardwood flooring is 9% there is a 3% difference between the two wood products, which is in the allowable tolerance of installation. Although some movement can be expected even in this range, dramatic expansion and contraction can happen outside of these measurements. There are several electronic moisture meters available on the market to test the moisture content of the hardwood and subfloor. These are generally a pin probe type meter and they can give you an immediate reading of your wood's moisture level. It is very important that it is set to the species of wood that you are installing and that you take moisture measurements from several boxes of material and from several areas of the subfloor throughout the area that is to be installed.

3. Climate Control: Climate control might be the single most common reason for customer dissatisfaction with their hardwood purchase. It is CRITICAL, that the proper temperature and humidity level be maintained throughout the life of the hardwood installation. Improper climate control will result in the material swelling in the summer and shrinking, or gapping, in the winter. Without proper climate control within the house, gapping and shrinking will definitely occur. In the Northwest we do not have a huge problem with this issue unless there is a device used in the home which dries out the air to an extreme amount like a wood stove. This is why a pot of water is ALWAYS recommended to be kept on the wood stove when using it as a heat source. The pot of water keeps moisture in the air. Special Note: Some products that are constructed with HDF cores, are more stable and less prone to expanding and contracting.

4. Floating Floors: A key thing people miss when installing floating floors is to allow for an expansion gap around the room. Just as real dimensional lumber expands and contracts, so does your floor. There must be enough space left at vertical surfaces, like walls and posts to allow for this movement. The larger the area the more space that is required. Rule #1 - Always leave the required expansion gap called for by the manufacturer. Rule #2 - If your installer says that it is not necessary, fire them and refer to rule number one.

You can cover all expansion gaps with wood wall base or quarter round wood trim or a combination of the two.

5. Expansion Joint: Expansion joints are almost always required between rooms, where a room meets a hall or in large expanses. You can use a "T" molding in these areas to allow for the floor expansion and contraction.

6. Moisture Control: Here is a big one! Moisture in the subfloor, called "hydrostatic pressure or vapor emissions", is a MAJOR reason for flooring failures. The subfloor is not to exceed 65% relative humidity. There are several moisture meters that can be used on the floor that provide accurate readings, or a calcium chloride test, used for "concrete floors". If your wood subfloor is above 12% with a meter, do not lay the floor. If your wood subfloor is above 12% then you have to find out why - it could be a new floor and just needs to dry out. If you have concrete floors, you have to find out the source of the moisture. If you still cannot figure out why the floor is above 12%, don't use hardwood. Period. I mean it...you will kick yourself. If your floor is ok to install, remember to always float an engineered floor over 8 mil plastic when going over concrete so as to eliminate and minimize water vapor coming through the concrete floor.

7. Glue down Flooring: In residential installations, most flooring that is engineered is either click together or tongue and grove. I don't think I, personally, would ever glue down an engineered floor. It is an acceptable way to install but I find that it is terrible to rip out years later. Either glue it together or click it together but don't glue it down to the subfloor unless you have a very specific reason to. I have seen more problems even stapling it down to the subfloor. Stapling down your engineered floor will just lead to squeaks and creeks that will drive you nuts. Pull out the instructions that you threw in the garbage and look up the manufacture's installation methods, then go file the instructions with your purchase receipt for future reference.

8. Nail Down Flooring: A very common mistake we have seen in solid flooring installations is proper nail length, gauge of the nail, and spacing between nails. Always refer to the manufacture and double check the subfloor thickness. When using a pneumatic nailer, pay close attention to proper PSI settings.

9. Natural Product Variations: One of the inherent beauties of hardwood is the differences between boards and how much or little they accept stain. No two pieces will ever be alike and that is one thing that makes wood flooring so luxurious and realistic compared to laminate flooring. Pay careful attention to the layout and selecting the color and grain of each board when you are working with the product. Work out of 4-5 boxes at a time when doing a layout, this will randomize any variations between boxes of hardwood.

10. Culled Material: In every natural product like wood, there will be some pieces that, while not defective, and within industry standards, are not what the consumer, you, wants visually. Generally allow for 5-10% waste factor on material. This means that you need to buy 5-10% more material then what your job physically measures out to be. Larger jobs of 1000+ sf could work with 5% while jobs under that square footage can figure 10%.

When buying material from the "Big Box" stores you have to keep in mind that when they purchase materials for a "stocking special" they purchase a product that they can sell at the lowest possible price to use in their ads. This means that the hardwood that they pick up is "Tavern Grade" which means it does not meet the specs of normal running line material. The product will have more voids, mis-filled holes in the face of the hardwood, warped boards both side to side and up and down, and broken toungs. This product will have a lot more waste factor to it, even as much as 20-25% compared to the professional flooring stores stocking inventory. Buyer beware, what you could think is saving you that 10% difference in price, could be costing you 20-25% more in having to buy more wood for the same size job. Oh, and by the way, always keep 1-3 full boxes of material for doing repairs. Do not return them to the store. You will NEVER be able to match the floor again should you need to. Paint would fall into this same realm of thinking. When you need to touch up a wall, they will NEVER be able to exactly match the color. In hardwood there is not only color to match but grain of the wood, board width, color and the number one factor, gloss level of the hardwood or "luster".

11. Scratches: All hardwoods scratch - it's a fact of life. You just cannot change it. You will scratch, scuff, and dent your hardwood under the right conditions. Scratches occur more frequently under chair legs that are small in diameter and at entry areas where abrasion dirt is tracked in on the bottom of shoes. The industry has developed more scratch resistant surfaces like those containing aluminum oxide, they tend to show less scratching but the wood still dents under pressure. To help save your floors use felt chair protectors under all of your free standing chairs. Area rugs are great for rolling chairs in the kitchen, or replace the cheap plastic wheels with rubber barrel casters. The more expensive casters will spread the weight of the chair out more efficiently. The best first line of defense is an area rug by the front door or a tiled entry way to catch the dirt and sand "before" it gets dragged across the hardwood floors. Good rules of thumb, shoes get checked at the door.

12. Cleaning: For heaven sakes ask a flooring professional! Your wood floors are tough but they are delicate when it comes to moisture and cleaners. Throughout this article we have talked about moisture, now we don't want to ruin the floor by trying to maintain it improperly. Follow the manufacturer's instructions.

DO NOT: Use a wet mop system, a steamer, a bucket and mop, any "Wax" finish, no soaps, no polishes, and for heaven's sakes do not over wet your floor with a wet mop.

The best way to clean your floor is to use a microfiber mop and spray a professional hardwood cleaner onto the mop head, to dampen the head, and then clean your floor. If you see streaking or a wet trail, you have used too much cleaner and immediately wipe up the excess with a terry cloth towel.

If you treat your hardwood floors with the love you would treat your wood dining room table, you will be happy for years to come.




For more information visit http://www.yourfloortrader.com By: Dean Paulson, Owner
The Floor Trader of Tacoma - The Floor Trader of Lacey - Floor Decorators Carpet One
"Family Owned and Operated Since 1921"

Written By: Dean Paulson, Owner and Manager

Dean Paulson is one of the third generation family members who is involved in the day to day operations and management of The Floor Trader of Tacoma, The Floor Trader of Lacey and Floor Decorators Carpet One in Bremerton. Since 1921, the Paulson family has owned and operated professional floor covering stores for the last 90 years, if you want to know the truth in flooring, then you have found the right company to work with.

Visit Us Now At: http://www.YourFloorTrader.com





This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.

2012年2月8日 星期三

Experience the Luxury Living in Santorini Islands Buying Your Dream Villa


Santorini Islands are most desired holiday destinations of the visitors coming Greece with the intention to enjoy their golden moments in luxury and comfort. Mediterranean climatic condition, unique colored beaches, white-blue buildings, snow clad mountains, breath taking golden sunsets, gorgeous landscapes, sunken volcanoes, museums, churches and prehistoric scriptures of the Santorini Islands has been attracting tourist towards it since last decades.

The unique colored beautiful black-sand beaches, the sun rise and sun set, the turquoise waters of the Aegean Sea, relaxing sunbathe, delicious food in various restaurants motivate visitors to spend lounging and relaxing time at Santorini. For those who want to experience the nightlife of Santorini, night clubs, cinemas, dance bars, beach bars, cheap hotels and restaurants and many other sources are easily available for enjoyment and merry-making.

Tourism is the major source of income in Santorini islands. So they accommodate each and every necessity of a visitor to maintain a relaxed and comfort lifestyle such as: beautiful climatic conditions, properly communicated destinations, low crime rate, cheap hotels and villas, cheap cost of living, healthy delicious diet and many more.

The weather condition of Santorini is quite humid with an average temperature about 10 to 20°C in winter and 30-40°C in summer. There is not so much rain in winter and quite rare in the summer. The heavenly Mediterranean climate of Santorini offers a clean and pollution free environment to stay with your family and children. This quiet and romantic atmosphere facilitates just married couples to experience a memorable honeymoon tour here. That's why Santorini is more popular as a honeymoon destination and for weddings.

Strict law and order of Greece helps to minimize the crime rate in Santorini. Due to this reason huge tourists come here to enjoy their holidays happily and peacefully without any sort of disturbances.

Santorini islands are properly communicated with each other. In this small Island, there are many mediums like flights, buses, rental cars, cruises, ships and boats easily available any time for transportation.

Luxurious as well as cheap beach hotels and restaurants considering to the budget of visitors are available. One can get the international hotel accommodation or cheap hotel accommodation according to the requirement. You can take the taste of various delicious foods and drinks at your choice in the hotels and restaurants of Santorini Islands.

It will be a better idea to have your own villa and enjoy the luxurious lifestyle of Santorini at your own home. We can help you for finding such a villa at Monolithos beach.

About Monolithos Beach Villa:

In Monolithos beach we have two similar well built villas just 30-40 meters away from the sea and next to each other. The both villas can easily accommodate a big family for either holidays or permanent stay. Both villas have a living room, a kitchen and a WC in the ground floor whereas in the first floor three bedrooms and three bathrooms are available. In the ground and first floor spacious balconies exist for spectacular sea view. There is also a basement which can be used as a large storage area. Each villa has individual central heating systems. The major difference between both the villas is that one of them have individual rooms for kitchen and living whereas the other villa has a large room used for both kitchen and living purposes.

A public children's playground exist approximately 50 meters away from the villas and a few meters after that the organized Monolithos black beach starts. The nearest bus station is about 100 meters away while the capital of Santorini, Fira is only 7 kilometers away (only 10 minutes drive).




This article is written by Dillip Kumar Barik in courtesy of Property-in-Santorini. Get required information on Villas in Monolithos Beach at Santorini Islands, Greece.





This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.

2012年2月2日 星期四

Ozone Generator Buying Guide


If you're a homeowner and your home has recently suffered water damage, smoke damage, mold infestation, or the dreaded "smell of death" from an expired rodent in a crawl space, then you've probably read that an ozone generator might just be the answer to your problems. However, with so many different types of ozone machines on the market, how is one to decipher between fact, fiction, and pure unadulterated BS? I have a few tips that will help you avoid getting ripped off and help you make a wise ozone generator buying decision.

The first thing you have to realize is that the ozone generator industry as a whole is not regulated by any government agency. More than half of the so called ozone generator manufacturers are nothing but Internet opportunists trying to cash in on a high priced, somewhat in demand product. These unscrupulous vendors make their overpriced ozone machines in their own garages, set-up a website that makes all kinds of outrageous claims as to the output capabilities of their ozone machines, then advertise their website in the Search Engines. A sure fire way to weed out a few of these vendors is to do a Google search of their business address then use the "street view" feature by dragging and dropping the "little man icon" onto the street right in front of their business address. If you see a residential home, you might want to steer clear of that vendor. Why? It's easy to shut down your operations when you're doing business from home. When you invest in a business location, it shows you're in it for the long haul and it's harder to walk away from a "brink and mortar" location than it is from a home run business. Why should you care that the vendor is in business for the long haul? Because ozone generators are prone to fail due to the very corrosive nature of ozone and the damaging effects it has on the metal components within switches, timers, relays, etc. Same goes for eBay vendors who buy a lot of ozone machines without also investing in replacement parts. When their supply runs out, they're out of the ozone business, and you're left with an expensive door stop when your machine fails in due time.

Once you find an ozone machine that tickles your fancy and you're ready to invest your hard earned money, the next question one must ask themselves is "How do I know if this machine really puts out as much ozone as the vendor claims? Ozone generator manufacturers don't have to validate the ozone machines they sell to ensure they are producing the amount of ozone being claimed. I've seen some vendors claim 16,000 to 20,000 milligrams per hour yet when we tested those machines in our shop with our ozone meter, they produced 3000-5000 mg/h. That's quite a big difference between what is actually being produced and what is being claimed. How then can you make sure the ozone generator you purchase is actually producing the amount of ozone being advertised? Simple! Ask the vendor the following questions in an e-mail (future fodder for a 100% money back should you test the machine and find the information provided was incorrect)

QUESTION #1. How Many Volts is the Power Supply! An ozone generator creates ozone by creating an electrical spark that splits oxygen in the air. In order to accomplish this feat, you have to create a high voltage electrical spark. A simple rule I've observed in the lab and well recognized in the ozone industry is that a 3000 volt transformer can produce around 3000 mg/h of ozone per hour when attached to a high voltage ozone element or six or more MICA plates at 40% humidity or less. Each Mica plate can produce a maximum of about 400 milligrams of ozone per hour IF it is properly installed due to the weak electrical spark it is capable of generating from the wire mesh. If you own a MICA plate ozone generator, view the plate in the dark. It won't light up very bright, very dimly as a matter of fact. The types of ozone plates that turn bright purple in the dark are called "High Voltage Ozone Elements" and they can produce around 3000-4000 mgh per plate when fed with a 3000-4000 volt power transformer. These types of plates glow purple, almost like UV lamp, in the dark. They create a very strong electrical spark that is much more efficient at producing ozone vs the old fashioned MICA plates. As a matter of fact a 4000 volt transformer and ozone element only uses about 35 watts of electricity, now that's efficient! Therefore, Tip #1 is to ask the vendor to e-mail you in writing the exact voltage, amps, and watts used by their power transformers and how many and which type of ozone plates their machines use. If a vendor claims for instance their machine produces 16 to 20 thousand milligrams of ozone per hour but their machine only uses one 5000 volt transformer, then you'll things just don't add up.

QUESTION #2. What type of ozone element does the ozone machine use? Believe it or not, some vendors will try and convince you that the ozone elements in their machines are "permanent" and will last forever. Folks, there's no such thing as a permanent ozone plate! If used in 90-100% humidity, even the expensive high voltage ozone plates will only last 20-40 hours. Ozone generators are not made to be used in 90% plus humidity! In humid areas, you must run the air conditioning or a dehumidifier in order to perform a shock treatment. Tip #2 therefore is to think twice before buying an ozone generator from a vendor who doesn't offer replacement ozone plates or makes a machine that utilizes "MICA" plates.

Once you have those answers in writing, save the e-mail in case you need to use it to obtain a refund in the future. When you receive your ozone generator, have a local electrician friend of the family (or hire someone) to open your ozone generator and give it the once over and test the strength (in volts) of the power transformer. If you discover the stated voltage doesn't match the advertised voltage, ask for a refund. After all, what you're buying when you buy an ozone generator are high voltage power transformers, not a slick sales pitch! The honest vendors will clearly state their machines specifications on their websites and via e-mail if asked. They'll also provide you with a picture of the inside of their units and disclose the amount of plates, type used, etc. You should be weary of vendors who hold this information close to the vest or refuse to go on the record with this information.

Now you know what questions to ask an ozone machine vendor before making a purchase. I want to close out this "Ozone Generator Buying Guide" by giving you a few tips on how to save money on your purchase:

Tip #1. Ask the vendor if they sell any used units or any "bare bones" ozone generators. Many ozone generator vendors will have spare parts on hand from returned or fixed units they can sell "on the down low" for a mere pittance of the retail price. Others might be able to sell you a "bare bones ozone generator" without any of the bells and whistles you can easily use to make your own ozone generator, especially if you're the "do-it-yourself" type. You might also want to check eBay to see if anyone is selling high voltage power transformers in the 3000-12,000 volt range or high voltage ozone elements that can be easily attached to the power transformer. Some ozone vendors want $1000 or more for their ozone generators, however, the fact of the matter is that ozone machines are pretty basic electronic components and they shouldn't cost as much as a used car, especially if you buy the main components and "Do It Yourself."

Tip #2. Don't buy an ozone generator with too many "bells and whistles". Ozone as I've already mentioned is very corrosive over time to all metals except stainless steel. Unfortunately, all electronic switches, relays, etc needs to use regular metal in order to be conduce electricity. What we have therefore is a dilemma. The solution? Don't buy an ozone generator with all the bells and whistles! This would include an internal timer, ozone output dial (to turn the ozone up and down), etc. Just realize that if you do buy an ozone generator with these parts that eventually the ozone is going to destroy those parts and all it takes to shut down an ozone generator is to have one of the electrical components fail. If you want a timer, buy an external timer for $5 at Lowe's. If you want to be able to turn the ozone output up and down, buy a "repeat cycle timer" that can turn your ozone generator on for a few seconds ever x amount of minutes, and repeat that cycle indefinitely. Both of those items can be connected via an extension cord in another room to your ozone generator. Less is more when it comes to longevity in shock treatment ozone generators.

Tip #3. Don't over do it when performing shock treatments! There is a reason the trained professionals that administer ozone shock treatments command thousands of dollars to perform shock treatments; they know what they're doing and how to safely and effectively perform a shock treatment without leaving your home smelling like ozone for weeks after the shock treatment! Besides being an ozone generator manufacturer, I also run a restoration business that employs ozone in some of our work. For mold remediation, ozone only plays a small role in riding the house of toxic mold for instance. Sheet rock has to be taken down and replaced, super high CFM air cleaners make sure the mold, when disturbed, isn't re-distributed throughout the structure. Wet wood has to be dried. Leaky pipes have to be fixed, etc etc. Yes, shock levels of ozone will kill the mold, but that's just a small part of mold remediation, regardless of what some ozone vendors might advertise to help hawk their units.

The main mistake I see homeowners make when doing a shock treatment is not properly removing or covering all petroleum based products such as carpet foam, sofa cushions, etc. We use Kevlar to cover carpets and foam filled sofas, mattresses, etc. Kevlar is ozone resistant and will keep the foam from interacting with the ozone. Ozone will oxidize foam and rubber and cause a chemical-ozone smell that can linger for weeks. So tip #3 is to not over do it with an ozone shock treatment! One or two hour shock treatments in furniture filled homes is advisable. You might have to perform several such shock treatments, but it's better to be safe than sorry when shocking a furniture filled home. Some vendors tell their clients to just turn the ozone generator on and let it run for a few days. I strongly advise against that practice.

Tip #4. When you are ready to buy, call the vendor and order over the phone. Odds are at some point in time your ozone generator is going to need service. I don't know about you but I hate buying something on-line, having it break down, then not being able to speak with a live person for support without having to wait on hold for 30 minutes or worse yet, not being able to speak to a live person at all then not having my e-mails answered! You can nip this type of situation in the bud by first calling. If you can't easily get through and get a well informed live person to answer the phone to place your order, then consider buying elsewhere. This bit of advice goes for making any large ticket item purchase on the Internet.

If you want to save money and make a wise investment, ask the right questions before you buy your ozone generator and also consider incorporating some of my tip suggestions as well. The more you shop around, the more time you spend doing some Internet research, and most importantly, the more time you spend e-mailing and talk directly with the vendor, the more likely you are to make a wise investment and end up with a great ozone machine that lasts you a lifetime.




Mickey Alcantara, CEO of Ozone Generator USA. Example High Voltage Ozone Plates.





This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.

2011年12月20日 星期二

Humidifier Buying Checklist


There are a few features that are essential to a useful humidifier while others can be completely optional. It really depends on the reason you are looking for a humidifier but this is a simple checklist covering some of the basics which you can customize to your needs.

1. Humidity meter - A unit that allows the user to choose a desired humidity setting is very convenient to have since it can self-regulate. A humidifier with an auto shutoff feature when the target level is reached helps prevent over humidification. Over humidification can cause mold and mildew. The recommended relative humidity level is usually around 30% to 50%.

2. Low Water Indicator - Some humidifiers will have indicator lights to alert the user of changes in particular operating conditions. A low water indicator helps remind the user to refill the water tank as necessary. It is a waste of energy to run the unit on an empty tank. In the event that nobody is around to notice the indicator lights, some units offer auto shutoff when the water tank is empty.

3. Speed Settings and Noise Control - Most top brands today are very quiet but that might not be enough for some people who are disturbed by background noise, especially when trying to sleep at night. There isn't much you can do about a loud unit but if it offers speed settings, lowering the speed can reduce the amount of noise produced.

4. Unit Size - It makes no sense to buy a small table top unit if the purpose is to increase the humidity of a room the size of a concert hall. On the same note, there can be negative repercussions to operating a large unit in a small space. Determine whether you need a unit for the entire house or for just a room.

Those four items really cover the basics anyone would need to make an educated humidifier purchase. There are extra features offered by some models such as air purification, sterilization, or dehumidification but dedicated units for these functions will usually do a better job at their particular function. Nonetheless, some people enjoy the convenience of having these functions built in.




Visit the Best Humidifier Filters website to read more about replacement humidifier filters and the different types of humidifiers.





This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.