顯示具有 Solid 標籤的文章。 顯示所有文章
顯示具有 Solid 標籤的文章。 顯示所有文章

2012年7月22日 星期日

How to Fit Solid Wooden Flooring


Making sure that your wooden floor is finished and laid correctly, will save you lots of money in the long run.

These 10 key factors must be taken into account when fitting a solid wood floor.

1.Height allowance

2.Sub floor Types

3.Installation methods

4.Skirting

5.Quantity to order

6.Quality and Moisture content of wood on arrival

7.Acclimatization of the wood on site

8.Expansion gaps

9.Direction of boards

10.Maintenance

1. Height allowance: First thing to check is whether the thickness of the new floor you have chosen and the possible addition of a sub base will affect your room in any way. Either by head height on low beams, ceilings or doorways or will it create a step into leading rooms.

2. Subfloor: What is the existing subfloor? In all cases check the moisture level of the sub base. Fit a solid wood floor anywhere near moisture and you are wasting your time and money. Generally all ground floor bases are prone to moisture problems at some time or other, so adequate moisture proofing is essential. First floors are less prone and less precaution is needed. Different sub bases include, concrete, wooden beams, chipboard planks and old floor boards.

3. Installation methods: There are four different methods of installation each one has its own advantages and disadvantages and specific applications. Gluing: used on both concrete and chipboard sub bases where there is an even and clean surface. Can be messy and glue is expensive. Nailing: used on wooden beams, chipboard and old wooden floor sub bases. Excellent long lasting and strong method but a special nailer is required. Floating: the new floor is not attached to the sub base by gluing or nailing but is floated on top of it. For this method you will need to use an underlay that you wooden floor rests upon. Underlays are good in that they provide a moisture and acoustic barrier Sticky membrane: This is similar to floating a floor but the underlay used is sticky on one side. But be warned if you are not experienced in this method of installation it is very difficult, as the sticky side is extremely sticky and of you get the board in the wrong place you will have extreme difficulty in adjusting it.

4. Skirting: is decorative and provides a necessary cover for the expansion gap that you need to leave around your solid wood floor. You can undercut the skirting, remove the skirting and refit it later or fit beading up to the skirting which will cover the expansion gap.

5. Quantity to order: To calculate the quantity of timber to order measure the rooms and calculate the square meters, then you must add a minimum of 5% extra on top of your area to allow for cutting and wastage. It seems like an unnecessary expense, but it is unavoidable. If you have lots of corners and small rooms it is advisable to allow 10%. The last thing you want is to run out and then not be able to get matching timber.

6. Quality and Moisture content of wood on arrival: Due to the popularity of wooden flooring, it has become a very big industry. The benefit of that to you the consumer is that it has become very competitive. So good quality wood is available at cheaper prices, however Do Not necessarily go for the cheapest you can find, for the following reasons. Floors boards have gone through multiple stages of manufacture from being cut down and machined to be kiln dried and finished. All these stages cost money and if the manufacturer has skimped on these to keep his costs down ultimately the quality of the final product will be inferior. Cheap boards that do not fit together or warp are not cheap in the long run. The moisture content of the wood on arrival at you premises should be between 8% and 12%. It is unlikely that you will have a moisture reader, so will be difficult for you to measure this. This is an advantage of using a professional. They can ensure that these factors are correct and it is their responsibility to do so. Make sure they do.

7. Expansion Gaps: This is the big one. In my experience people generally tend to underestimate the expansion and contraction properties of wood. When a floor is on the move and there is no space for it to go into, nothing can stop it. It will buckle itself and it will break walls if necessary for it to expand. Therefore it is vital to leave a gap all around your floor into which the floor can expand, about 15mm is preferable. Please ensure that this gap is consistent all around including doorways.

8. Acclimatization of the wood on site: This is a long debated subject amongst floor fitters and my beliefs are based around natural laws. Acclimatizing wood in a very dry centrally heated room during winter is going to give you problems as it expands in the summer months and conversely putting wood on site in summer months with all the windows and doors open is going to give you big gaps in the winter months as the wood contracts. Likewise there is no point in acclimatizing wood at any time of year on a building site as this is not the environment that the wood will always live in.

So what does one do - Well these are the ideals: wood arrives from the factory at between 8% and 12% and the ideal humidity of a room for wooden floors is between 40% and 60%. Keep within these ranges when you fit your floor and keep the room at this humidity and you will never ever have a problem with you floor. Hiring a professional takes this worry away from you, but ensures that your professional gives you a guarantee on his workmanship. In doing so he is stating he is comfortable with his level of skill and knowledge.

Fitting engineered floors certainly does negate a lot of these problems as they do not expand or contract to nearly the same degree as a solid wood floor.

9. Direction of boards: There is no right or wrong here. And it is generally a matter of taste, but there are a few guidelines. If you are fitting onto existing rafters or batons you do not have a choice as the boards have to run at 90 degrees to the rafters. General rule of thumb is to run the boards away from the door leading into the room. Looking down the length of the board tends to make the room look larger. Boards running cross ways tend to be jarring to the eyes. Likewise run boards along the longer length of the room, for instance a long hallway with the boards running across the short length looks strange. If in doubt and if you are a little bolder try going diagonal it has a great affect.

10. Maintenance: Methods used will vary according to the type of finish you have. Suffice to say that a little ongoing maintenance will save you a lot of effort and money down the line. Wooden floors are very practical and very easy to keep clean and looking great, but do not just ignore them once you have fitted them. Follow the advice from your layer or wood supplier.




The author of this article is a Director of Whittlewoods ltd, one of the leading wooden floor companies in the UK. He has over 25 years experience in the timber industry and understands everything about wood. Have a look at the company's website Whittlewoods Oak Flooring you will most probably find the answers to all your Wooden flooring questions right there.





This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.

2012年7月14日 星期六

Choosing and Installing Solid Oak and Ash Floors


When building or restructuring a house a big attention must be paid to the choice of the materials used. The choice of high quality solid wood floors means care and the importance of the property. It is impressive how solid wood floors change the value of the house or office, and the prejudice that solid wood oak and ash floors is the most expensive alternative of a flooring surface is no longer valid.

With the development of efficient technology and eco-sustainable policy, meaning that a new tree is always planted on the place of an old one, it is possible to optimize costs, thus decreasing a price of a final product significantly.

Some home and office owners state that it is not only important to buy a solid wood flooring, but it is also important to install it in a correct way, in order not to make it raise and thus be damaged at a later stage. It is, of course, an important consideration, but it is important to keep in mind the following aspects:



If solid oak and ash floors are of the highest quality, they are unlikely to give any problems at all even in a century;



Smaller solid wood floor boards are unlikely to change their shape and they react significantly less in respect to large, long and wide wooden boards, which often change their shape even before being installed, as wood is sensible to humidity and temperature alterations. Smaller wooden boards maintain their production shape under any conditions;



It is important to choose a highly professional wooden floor installers, who are aware of different wooden floor installation methods: using nails, using glue or floating, and who are able to advise and realize different wooden boards installation designs, adding even a more sophisticated and different look to every room. It is necessary to remember, that once installed, solid oak floors may expand up to 3 mm per square meter, and solid ash floor may expand up to 7 mm per square meter, thus it is of vital importance to leave enough space for these floors to make them move and adjust. Professional solid wood installers are certainly aware of these facts and will leave enough space under the skirting.

Keeping in mind the information presented above, you will not encounter any problems with the high quality solid wood floor after it has been installed. And it has not only an esthetic advantage that it is more beautiful and more natural material than many other flooring surfaces, but it also is necessary to remember and pay attention to the fact that solid wood floors are easy to clean, they are hygienic, and they last for centuries without any need to be replaced. They add a great value to your property and the flooring surface always looks like as if it has been installed a day before.




Top Parquet Ltd offers Wide range of solid wood flooring [http://www.top-parquet.com/] for residential & commercial purposes.





This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.

2012年1月4日 星期三

Ways to Rectify Cupping in a Solid Wood Floor


Diagnosing the Cause Of, and Avoiding Cupping in Solid Wood Flooring

Cupping or dishing in solid hardwood means the boards raise slightly at their edges making the hardwood flooring uneven across its width. The cause of cupping is an imbalance of moisture through the timber. This can be a result of a spillage on the floor, or because of the hardwood flooring gaining moisture from the sub-floor material.

Taking moisture reading of the underside of the timber and comparing this with a reading taken from the upper side will confirm this.

Wood always expands when it takes on moisture. It therefore follows that moisture on the underside of the wood will make the underside expand laterally. However, the upper side of the wood which has not absorbed any moisture, so this stays at near its original size. The immense strength of the expansion of the underside of the wood is what makes the edges of the wood curl.

On nearly every incidence of cupping that I have inspected, the flooring was laid onto a solid floor using adhesive- meaning that the sub-floor was too high moisture content. A quick and simple way of identifying the problem is by taking a moisture reading of the sub-floor. Usually this is just a matter of drilling a small hole into the sub-floor between the gaps in the board, and inserting the probe from a moisture meter. The reading of the sub-floor should be around 9- 11% moisture content. If it is higher, then this could be the source of the moisture.

As part of an inspection process, I also look for evidence of leaks from appliances e.g. dishwashers, and leaks from heating pipes, and poor or zero ventilation in the room.

I also take a reading of the humidity at the time of the inspection, although this is merely a snapshot of one moment in time and does not necessarily give an indication of the humidity at an earlier time that may have caused the cupping.

However, another cause could be that the sub-floor was within the above parameters, but the wood could have been dried too aggressively before being installed. This would mean that the sub-floor was at the correct moisture content, but the wood was too dry to be installed. In a case like this, the humidity needs to be regulated quickly which can usually stabilize the problem.

Dealing With the Cupping

First of all check the integrity of the fixing of the floor. In extreme cases of buckling, the flooring can (in the case of adhesive installations), de-bond from the sub-floor. If this is the case, the floor is possibly beyond repair if in excess of 40% of the floor area is affected in this way.

Stabilize the humidity in the room as quickly as possible. If the relative humidity of the room is below 40% then this is too dry. A correct humidity level is between 45% and 60% R.H. This can be achieved by the use of a humidifier. It may then ne necessary to have the floor sanded and re-finished, which should then eliminate any further problems and restore the appearance of the flooring.

It is vital though, that the stabilization is undertaken gradually over a period, and that thorough moisture readings are taken on both sides of the timber before sanding. If the floor is sanded before the wood has stabilized, the edges of the board will be lower than the centre of the boards.

How To Avoid the Cupping

If you are about to lay a floor using a stick down method, take thorough moisture checks of the sub-floor and the humidity of the room that is to be fitted. The sub-floor should be ideally below 12% moisture content and the humidity of the room should be between 40% and 60%.

If there is any doubt regarding the integrity of sub-floor, it may be necessary to apply an epoxy resin damp proof membrane to the sub-floor. If you are installing using the secret nailing technique, then an impervious layer should be laid over the sub-floor or battens -e.g. foil, polythene membrane or builders paper.

Make sure that an adequate acclimatization period is allowed for. This is normally achieved by storing the flooring in the room for at least two weeks prior to installation. The room should be heated and ventilated in the same conditions that the floor will be used i.e. temperature and relative humidity.

Further Points to Consider

1. Tangential cut hardwoods always have greater movement than radial cut or quarter sawn hardwoods.

2. Narrow width solid hardwoods are always more stable and less prone to movement than wider width flooring.

3. Engineered flooring will always cope better with fluctuations in moisture, and climate.

4. Wood floors will always move depending on the season- e.g. in winter months slight opening of joints and cracks are to be expected.




David is the technical manager of Birbek Floors Ltd, a UK distributor of European oak wood flooring and American solid walnut flooring





This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.