顯示具有 Solar 標籤的文章。 顯示所有文章
顯示具有 Solar 標籤的文章。 顯示所有文章

2012年5月15日 星期二

The Process and Future of Solar Energy


Our planet receives enough raw energy in the form of sunlight in sixty minutes to illuminate all of the worlds lights for a full year. Unfortunately, a very small part of it can be harnessed so most of the population still gets most of its energy from power plants that burn fossil fuels. Fortunately for our environment, we have recently seen an increasing trend in the demand for solar energy. This is partly due to the fact that solar panels are becoming cheaper as technology advances.

At the equator, the Sun provides approximately 1000 watts of energy per square meter on the earths surface. That means that 1 square meter of each panel can generate approximately 100 GW of raw power per year. That amount of power is enough to illuminate more than 50,000 houses. The entire area that would need to be covered by solar panels to power the entire world for a year would be the equivalent to one percent of the entire space of the Sahara Desert. The amount of power solar panels can generate on a given day depends on a few variables like smog, cloudy days, low temperatures and humidity.

Solar panel farms are a lot like other normal power plants with the only big difference being that most power plants get their energy from fossil fuels. And when conventional plants burn fossil fuels, they generate the by products which are contributing to global warming. Solar panel farms or solar heat plants (or CSP plants) absorb the rays of the sun to generate electrical energy.

This process of energy conversion in solar heat plants rather simple. The panels absorb the rays of the sun, which then shines on the power receiver. In this receiver, the energy is converted into steam from the suns rays. The steam is taken to tanks where it will be used to spin turbines and generate electricity. The process is clean because it requires no fossil fuels to be burned. It is safe for the environment and doesn't contribute to global warming like conventional power plants.

If more solar panel farms are implemented, the demand for oil will be reduced sharply. Today, there are many households that use solar panels for energy and more people are adding panels every day. When this demand for solar energy and other alternatives goes up, fewer people will use gas and fossil fuels, and the prices for these will surely drop as well.

If you use solar energy, you may actually be able to use "negative energy". Because every house is connected to the city's power system, the extra energy that your panels produce will go back into the grid and can be consumed by other households. This will result in you being sent a check by the electric company for the energy you put back in. Even if you panels are small, you will see a huge reduction in your bill. These solar panels, aside from being good for the environment, are good for your pocket!

Even though the initial investment into your solar panel system is a bit expensive, the panels will undoubtedly pay for themselves in the long run. Not only do you save money and perhaps even make some with your panels, you help the environment by reducing greenhouse gases and emissions. These systems are so durable they have been known to last years. PV cells are supposed to stay good anywhere from twenty-five to forty years. Most suppliers of solar panels have a standard twenty-five year warranty.

Finally, solar panels take minimal maintenance and they can be placed basically anywhere that gets a good amount of sunlight all year.




There is no question that alternative energy IS the future and the future is right now.
You can generate you own energy for a lot less than you think! DIY Energy features reviews and news on popular Do it Yourself Alternative Energy Projects.
Learn to build solar panels, and wind powered generators for a fraction of the cost of an installed system.





This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.

2012年5月5日 星期六

Solar Panel Systems, Renewable Energy, Energy Efficiency and Your Home


Reducing your Electric Bill with Renewable Energy

Using renewable energy to produce electricity and reduce your electric bill can be a sound long-term investment. Depending on the type of technology, you can expect a full return on your investment within 3 to 18 years. With financial or tax rebates from your utility company or state and national government, the payback period on your investment can be cut in half.

However, the very first step to considering any renewable energy system must be how to make your home or business more energy efficient. Generally, the basic rule is that for every $1 you spend on making your location more energy efficient, you save $3 to $5 on the cost of the renewable energy system. Let's go over some basic ways you can make your home more energy efficient.

Making Your Home Energy Efficient

One of the easiest things that you can do to reduce your electrical consumption is change out your regular incandescent light bulbs to compact fluorescent lamps (CFLs). CFLs use 65 to 75% less energy than a normal light bulb that produces the same amount of light. By replacing a normal 100 watt incandescent light bulb with a 32 watt CFL, you will save $60 to $80 in electricity costs over the lifetime of that bulb (10,000 hours). Now imagine how much you would save if you changed out all of your light bulbs to CFLs!

The technology for these bulbs has quickly evolved and improved in the last few years, while the cost has come down dramatically. You'll find that there are CFLs that will now fit most light fixtures and lighting needs-there are even dimmable CFLs!. Head out to your local department or hardware store and buy CFLs for as many of your light fixtures as possible. The investment is well worth it.

Another alternative to traditional lights are tubular skylights . Tubular skylights look a little like shiny stove pipes that start with a transparent dome on top of the roof and come down into some room for day lighting. We frequently see customers using tubular skylights to bring daylight into hallways and closets. The light is, of course, entirely natural and in some installations can provide as much illumination as a 100-Watt incandescent light bulb.

Energy Star and EnergyGuide

One of the biggest consumers of electricity in most households is the refrigerator. In most households, refrigeration is the number one electricity consumer after any electricity-based heating or cooling systems. If your refrigerator is over 10 years old, chances are it's electrically very inefficient. Consider replacing your current refrigerator with one that has a high Energy Star rating. Remember that just because a refrigerator may have earned the Energy Star label doesn't mean it's the most efficient model available-it only means that its efficiency exceeds the federally mandated efficiency standard by at least 15%. You can even do much of your investigation online at the Energy Star website. There you can search for the brand, type and size of refrigerator you want and sort by energy efficiency. When you shop in stores, consult the yellow EnergyGuide tags that are attached to all new refrigerators (and many other appliances). EnergyGuide is a different government program from Energy Star that offers information about annual energy consumption and shows you where each model lands in a comparison with similar models. For maximum energy savings, select the model that's a leader in efficiency in its class.

Ghost Loads

Also known as "phantom loads", ghost loads are the sneaky devices that constantly consume small amounts of electricity 24 hours a day-even when they're not actually doing anything useful. While each device by itself may not consume much electricity, the combination of all of them within your household may easily consume the equivalent of two or three 60-Watt incandescent light bulbs left on all day and all night. Over the course of a single year this adds up to over 1 Megawatt-hour-in other words, enough electricity to power an entire energy-efficient house for 2 to 3 months!

What are these mysterious ghost loads? The most common examples are the "power brick" adapters, or power supplies, that charge or operate cell phones, laptop computers, cordless drills, answering machines, radios, inkjet printers, and many other household devices. They're actually small transformers, turning AC electricity from the wall outlet into DC electricity for use by the device. While any one of these devices may only consume a small amount of power (e.g., 3-20 watts), a dozen or so of them, running simultaneously and continuously, consume a significant amount of electricity. What's worse is that even when you're not charging your cell phone or the battery for your cordless drill, that AC adapter may continue to consume power just because it's plugged into the wall. Other well-disguised ghost loads are those devices which have the "instant on" feature, such as most modern television sets, VCRs, DVD players, many radios and even many computers. While all of these devices are supposedly turned off, they are actually consuming anywhere from 3 to 20 watts continuously-just to stay ready for you to use them.

How can you decrease the consumption of energy by these parasitic loads? One of the simplest solutions is to simply plug these devices into a power strip which has an off/on switch. When you are done using the devices and shut them off normally, then just hit the off switch on the power strip. Many people make it part of their nightly routine to shut off these power strips just before they go to bed. For AC power adapters that you use at night, like for charging a cell phone, put those on a separate power strip that you turn off during the day when you take your phone with you. Simple solutions like these could reduce your ghost electric loads by as much as 80%. In real-dollars terms, this means saving upwards of $120 per year in electricity costs, depending on your local electric utility rates and how dedicated you are to reducing your ghost loads.

A Special Note for People Who are Planning to Live Off-grid

If you're planning to use an off-grid solar panel, wind turbine or hydro electric system and plan to have a 12 or 24 volt battery bank, you will often be able to find devices and appliances that work directly with these DC voltages. The benefit to using the devices is that they will not need an AC power adapter which needlessly consumes electricity whether or not the device in use. After all, what an AC adapter plug does is convert normal AC household electricity to DC type of electricity to power the device, and it rarely does that conversion efficiently.

Energy Efficient Cooling

During the summer (and in warmer climates) air conditioning is frequently the largest consumer of electricity. An inexpensive way to reduce the demand on your air conditioner is to keep your attic cooler with a solar attic fan. Powered by a built-in solar panel, solar attic fans turn on when your attic warms up during the day. By venting the hot air out of your attic all day long, the floors below stay cooler and as a result your air conditioner runs significantly less.

Solar attic fans can be installed by good do-it-yourselfers or carpenters. They require no wiring. A hole needs to be cut in the roof, the attic fan is slipped in and the edges are sealed up well with roof caulking. The solar panel built into the fan unit is designed to last at least 25 years. A solar attic fan is another wise investment that pays for itself very quickly.

For people who live in zones that are relatively dry but hot, evaporative coolers (also known as swamp coolers) are a cost effective and energy efficient alternative to traditional air conditioners. Evaporative coolers use about 25% the energy an air conditioner would need. Unfortunately, most people live in climates that when it's hot it is also relatively humid. In these conditions evaporative coolers won't work effectively.

Another simple and green method for reducing your home's air conditioning costs is to plant deciduous trees whose leaves will shade your home in the summer time and shed its leaves for more sunlight in the winter time. By shading your home it heats up less, and therefore requires less cooling by an air conditioner. Planting a tree in this scenario has double the environmental impact, you're reducing greenhouse gases by both using less electricity and because the tree itself absorbs carbon dioxide.

Energy Efficiency and Household Appliances

Many other appliances throughout your household will have a newer and significantly more energy efficient version available. Here is a short list of other appliances you should consider replacing with higher efficiency versions: water heating tanks, air conditioners, dehumidifiers, dishwashers, telephones, VCRs and DVDs, ceiling fans, fax machines, computers and copiers. To see which brands and models have Energy Star certification and to figure which ones of those are the most efficient, visit Energy Star's website: www.EnergyStar.gov. To find out how much power your appliances are really consuming, invest in an inexpensive power meter like the Kill-A-Watt meter.

For many households the biggest bill is the heating bill. Probably the quickest, least expensive and easiest way to reduce your heating bill is to buy a programmable thermostat. You can set these thermostats to turn off the heat automatically when you're not home and turn it on just before you arrive. You will easily recoup your small investment in the new thermostat within one winter by running your heating system less. See your local hardware store or HVAC company for pricing and availability of different models.

Another basic step to reducing your home heating bill is sealing air leaks and adding insulation. According to Energy Star sealing air leaks and adding insulation can reduce your heating bill by as much as 10%. For homes with attics, one of the easiest and most effective places to put down insulation is in the attic. Visit your local home improvement store to find out how much insulation in different areas of the home is recommended for your region.

In the last few years, the use of solar air heating systems has become more popular. Mounted on an exterior, southern-facing wall or on the roof, solar air heating collectors can reduce a home's or business' annual heating costs by as much as 30%. Costing far less than a new conventional heating system, solar air heating systems usually pay for themselves in 3-6 years. They'll typically last for 18 to 35 years and require minimal maintenance. Working in conjunction with your existing heating system, the solar air heating system simply reduces your heating demand whenever you have even partial sunlight.

There are two basic flavors of solar air heating systems. There are ones that heat up fresh outdoor air and blow it into your home or business. The there are ones that take the air from inside your building boosts up the temperature by another 50 to 90 degrees fahrenheit and blows it back in (known as recirculating air solar heating systems). Newer homes and buildings which tend to be tightly sealed and have stale winter air will benefit doubly from the fresh air solar heaters. Older homes tend to be inherently draftier and experience full air exchanges with the outdoors a few times a day. These homes will benefit more from the solar air heating systems that recirculate the indoor air and boost it up in temperature. Typically, one 4x8 foot solar air collector is recommended per 750 to 1000 square feet of home space.

Water Heating Efficiency

More efficient models of domestic hot water heaters have also become available in the last several years. If you have an old hot water heater, chances are that it was not designed with efficiency in mind. Again, check out Energy Star's website  to find out which boilers are the most efficient.

Another good alternative to the traditional hot water heating tanks are instantaneous hot water heaters. These systems heat the water only when its being used. Normal water heating systems used in much of North America maintain a large tank of hot water to be used only a few times a day. To keep the water hot and ready at a moment's notice these traditional hot water heating tanks consume energy throughout the entire day, whether you need it or not. Instantaneous water heaters only consume energy the moment you need the hot water, saving the typical household 30 to 50% of the cost of hot water heating. You can find instantaneous water heaters that use natural gas, propane and electricity from a variety of manufacturers.

Solar Water Heating Provides You the Best Return on Your Investment

The energy (natural gas, propane, electricity, etc) needed for hot water heating can be reduced by 60 to 90% by using a solar water heating system to pre-heat water before it enters your existing traditional water heater. Remarkably effective and efficient, even in northern climates, solar water heating technologies have matured significantly in the past 30 years. Designed to easily last 30 years or more with minimum maintenance, typically solar water heating system will pay for itself in its first 3-7 years of use. Solar water heating systems heat your home's water with collectors that are usually placed on the roof of the home. The hot water produced is stored in an insulated tank until your home is ready to use it. Your traditional hot water will only kick on to heat up the water when the water temperature is not quite high enough. Solar water heating systems can be installed by advanced do-it-yourselfers, but it is recommended that a licensed plumber or installer review or do the more complicated plumbing.

Energy Efficiency - Your First Step Towards Clean Energy and Energy Independence

The first step before purchasing a solar electric or wind power system to meet your electricity needs is to intelligently reduce those needs. Most homes can inexpensively reduce their electricity demands by 20 to 30% without ever having to make any adjustments in the lifestyles of the occupants. We provided you with many energy saving tips in this article, such as:


Replacing incandescent light bulbs with compact fluorescent ones.
Upgrading your older appliances with EnergyStar star ones that have a very low annual energy consumption rating.
Minimize the many hidden phantom (ghost) loads in your house.
Insulate your home well for colder seasons.
Creatively use vegetation to keep your home cool in the summer and maximize sunshine entering the house in the winter.
Use solar heating technologies (not to be confused with solar electric technologies) to cost effectively reduce how much your traditional air or water heating systems have to work.

There are literally hundreds of other little tricks and smart tweaks you can make to your home that will further reduce your electrical demands. Consider picking up a copy of the book '10-Minute Energy-Saving Secrets - 250 Easy Ways to Save Big Bucks Year Round' by Jerri Farris to learn of many of the other quick and easy ways to reduce your home's consumption of energy.

© 2009 altE Store, Inc - 'Making Renewable Do-able'(TM)




For more information on solar panel, wind turbine and renewable energy systems designed for DIY'ers, visit the altER Store at http://www.altEstore.com.

To view more free articles and webinars on solar power, wind power and renewable energy systems visit the altE University on the same website above. The altE University also offers live workshops for the green energy enthusiast, Do-It-Yourselfers' and up and coming professional photovoltaic system installers wanting to become NABCEP certified.





This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.

2012年3月2日 星期五

Solar Power Systems - The Future of Home Electricity Generation?


Solar power plants are very similar to other conventional power plants - with one significant difference: The majority of power plants use power from fossil fuels like oil, coal and gas. These conventional power plants burn the fossil fuels to produce steam, which drives turbines and generates electricity. When they burn the fossil fuel they produce greenhouse gases that contribute to global warming.

Solar power systems utilize the power of the sun's rays to generate electricity and do not need to burn any fossil fuel. When used on an industrial scale the process is similar to a conventional power plant. The difference is that to power the plant the solar panels collect the heat from the sun, this is then reflected into a receiver. The receiver uses this energy to turn water into steam. The steam is then used to turn the turbines and generate electricity.

On the days when the earth receives the most sunlight the maximum power density that the sun can give is about 1kW per square meter. This means that one square meter of solar panel can produce as much as 100 GWh (gigawatt hours) of electricity in one year. This is enough to power 50,000 houses. The only problem with these figures is that the efficiency of solar panels can be effected environmental factors including pollution, clouds, temperature and atmospheric humidity.

Unfortunately, only a tiny portion of the Sun's energy is harnessed and the world still relies on power plants that burn fossil fuels. The good thing, though, is that there is a constant increase in demand for solar energy; and over the years of continuous development, solar panels are much cheaper today. It is even possible to install small localised solar panels which don't use water and steam to generate electricity. These are called photovoltaic cells, or PV's.

PV cells come in a variety of sizes and they can generate electricity effectively maintenance free for 25 to 40 years. Most of the manufacturers of solar panels give their product a 25 year warranty as an assurance that solar panels will be dependable.

Today, there are more than 10,000 households with solar energy systems and the number of systems being installed is constantly rising. If the demand for solar energy, and other forms of alternative energy, continues to rise it will reduce the demand for oil.

Residential solar energy system can save you money by reducing the amount of electricity you by in from the power companies. In some cases where the solar power system is sizeable it may generate enough electricity to turn your electric meter backwards and you will be paid for the electricity you supply to the power companies. The excess energy that your solar energy system produces will go into the power grid and be used by other homes.

Until recently PV solar panels for residential use have been very expensive to install, however things are changing and it is now possible to build you own residential solar power system for literally a few hundred dollars.

If we all build our own Solar Panel and reduce our use of fossil fuel for electricity generation it can only have a positive effect on the environment.




To find out more about how to build a Solar Panel System and how every home could benefit from one, go to [http://diy-energy-online.com/#/solar/4539180046]





This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.

2012年2月6日 星期一

Wireless Electricity Monitoring and Control System With Monitoring Function of a Home Solar Plant


A home electricity energy monitor is an easy way to see how much electricity you're consuming - as you use it - and what it costs. It provides prompt, convenient feedback on electrical energy consumption. Some devices may also display cost of energy used, and estimates of greenhouse CO2 emissions in real time. It is also known as a "real time display". People who adopt home energy monitors tend to find that their energy usage drops by between 5 percent and 15 percent in the first year of using them. Various studies have shown such a reduction in home energy consumption.

A wireless smart electricity monitor is a device used to monitor electricity consumption, adopting the wireless technology. In a typical wireless electricity monitor configuration, a unit that measures energy output is connected to the electricity meter in a home meter box, and that unit transmits information about energy consumption wirelessly to a display unit. The display unit shows the amount of power being used, the cost of the power and the greenhouse gas emissions caused by the electricity being consumed. Some units also display other information such as ambient temperature and humidity.

Wireless electricity monitors are easier to use than wired electricity monitors because they allow users to place the display unit anywhere in their homes. This way, users can frequently check the amount of energy being used without having to walk to a meter or run wires through their homes. Wireless electricity monitors are usually battery-operated, though some units have direct current (DC) adapters that enable them to be plugged into wall power.

Most people who use a wireless electricity monitor do so to reduce energy consumption. Having a constant visual reminder of how much energy is being used at any given time, how much the energy costs and how much of an effect the energy use has on the environment can help people stay mindful of their energy use and remind them to turn off appliances when they aren't using them. The monitors can also be used to figure out how much energy particular machines and appliances are consuming so users can determine how they can best reduce their energy use.

Sometimes, a wireless electricity monitor only shows how much energy is currently being used, but many wireless electricity monitors also store usage data and enable users to review their daily, weekly and monthly energy use. This tracking ability can help users review how they're using electricity, stay motivated to continue using less electricity and develop strategies for reducing consumption. A wireless electricity monitor is not very expensive, and many users say they recoup the cost of the monitor in just a month or two by using less energy.

Some wireless electricity monitors also have the ability to connect to a personal computer. The transmitter unit can stream energy usage data to a device connected to the computer, usually through a universal serial bus (USB) port. Computer software that comes with the data receiver typically enables detailed electricity tracking and reporting.

More and more homeowners in the world have installed solar power system or wind micro generator in their homes to generate clean power, reduce the electricity consumption cost and protect the environment as well. Photovoltaic Solar Power is, in it's simplest definition, the energy created by converting solar energy into electricity using photovoltaic solar cells. Solar power cells are made out of materials known as semiconductors, usually silicon. A semiconductor has the properties of an insulator, but when exposed to light or heat is capable of conducting electricity.

The electricity energy monitoring and control system with home solar plant monitoring function works 2-way and is developed specially for households installed with home solar plant, providing a good solution for the home owners to monitor both the home electricity consumed in total and the energy produced by solar. Meanwhile, the system displays the balance between the consumption and production to the family members and provide wireless remote control of home electrical appliances when the family members want to respond to unsatisfactory balance data.

How the system works?

The clamp of one power transmitter is attached to the cable from your electricity meter. The current is then measured and transmitted wirelessly to a monitor with display screen that you can keep anywhere in your house. The clamp of the other power transmitter is attached to the cable from the solar power plant to measure its yield. In this case, the data for the consumption and solar production is attained respectively and the comparison is possible.

When the home electricity consumption is higher than the electricity production of home solar system or wind micro generator, the controller of the electricity control system provides an alarm warning, reminding the family members to act to reduce the power consumption.

The LCD screen of the controller display home power consumption data, production output by home solar system, balance data, cost data, history data. It also shows time and date.

The system supports up to 12pcs sensor plug sockets, that means it can wirelessly monitor and control up to twelve connected electrical appliances.

With this system, you can keep track of how your solar system is performing, how much money you are saving in electricity costs, and how much your system is benefiting the environment.

The wireless electricity monitoring and control system with Home Solar Plant monitoring function is consisted by 1pc controller with power adapter, 2pcs transmitters with sensor clamp, A number of sensor plug sockets and 1pc RJ45-USB data cable to provide computer link

* The controller receives data from the transmitters and sensor plug sockets, displays the real time and history information on its LCD screen and sends powering on/off instruction to the sensor plug sockets.

* 1pc of transmitter will be used to monitor the electricity output of the solar home plant, the other transmitter will be used to monitor the electricity consumption of the whole home.

* The sensor plug sockets detect the electricity consumption of connected electrical appliances. The sockets detect the energy consumption data and send it to the controller. The sockets can be controlled remotely and wirelessly by the controller to switch on/off the connected electrical appliances. One system can support up to 12pcs sensor sockets.

* The RJ45-USB data cable (available with software) serves to provide connection between the controller and the computer so that the user can view the real time data, the history data from the computer or remotely switch on/off electrical appliances.

We recommend you to view Sailwider's home solar monitoring system for more details.




Shenzhen Sailwider Electronics Co, Ltd is a high-tech company located in Shenzhen, China. Sailwider focus on latest technologies and develop practical and competitive products for the fields of electricity energy monitoring and control, automobile accessories, wireless communication, and electronics design and manufacturing.





This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.