顯示具有 Digital 標籤的文章。 顯示所有文章
顯示具有 Digital 標籤的文章。 顯示所有文章

2012年9月8日 星期六

Alalog Multimeters Vs. Digital Multimeters


From time to time I still pull my Analog Multimeter out of my Tool Box and put it back in to service. Sounds crazy doesn't it? I know what you are thinking, why in the world would anyone want to use an Analog Multimeter when you could be using a Digital Multimeter with all those bells and whistles.

Well there are just times I just like to pull out the old trusty analog meter and reflect on when I first started in the field of Electronics and Digital multimeters were the new kid on the block! I have to admit, when it comes time where accuracy is a factor, I will always go the direction of a Digital Multimeter, but when working on hobby projects, it's always fun to go back to old school.

Analog vs. Digital:

Analog Meters are cheaper than their Digital counterparts.

Analog and Digital Meters both use test leads, one black and one red. Red always representing positive and black representing ground.

Both meters measure voltage, ohms, current and resistance. Although unless you are measuring resistance or making a continuity check,the Analog Meter will continue to function with out a battery, where a Digital Multimeter is dead in the water when the battery needs replaced.

Analog Meters can be read incorrectly if you are viewing the meter from the side versus straight on. The Digital Meter, well you can read the display from just about any angle and know that what you see is the correct reading.

Analog Meters don't have all the bells and whistles available to them like the Multimeters of today. Digital multimeters can be interfaced with your computer, they can read temperature, humidity, frequency and a gambit of other features that you just can't get with an Analog Meter.

When making measurements and you misjudge the scale on the Analog Meter your reading will be off the scale, where with the Digital Multimeter most models will self adjust or indicate on the LED readout that you need to change the scale for an accurate reading.

Bottom line here is I am not arguing that trashing your Digital Multimeter is something you might want to do. There is no doubt that when it comes to convenience and accuracy the digital side of things is the way to go. But I have to admit that at times, when working on electronic projects that don't require pinpoint accuracy, it's still fun to pull the old Analog Meter out of the tool bag and put it back in to service.




Mark Boehm is the president of M-B Electronics, Inc, Electronic Toolbox, Inc He has over 25 years of experience in the Audio Visual and Electronics Industry and a Bachelors degree in Electronic Engineering.





This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.

2012年8月30日 星期四

Digital Panel Meters Supply Information


Digital panel meters calculate and demonstrate every variety of procedures and electrical changes, such as force, current, temperature, speed, and voltage in an alphanumeric or numeric organization, frequently as a bar graph. A lot of these displays possess totaling, recording, conditioning and added functionalities.

Display styles of a panel meters can be either alphanumeric or numeric. The Alphanumeric can display numbers and letters both. Numeric can display numbers only. When indicating a panel meter it is imperative to state the number of digits exhibited. Universal character sizes for digits on panel meters comprise 0.37 inches to 0.56 inches, bigger than 0.56 inches and smaller than 0.37 inches.

The most significant factor to take into account when indicating digital panel meters is the measurements. The majority of these meters are constructed to be placed upon a rack or in a panel, so the surface height and width are essential factors.

Some features are common to panel meters. These features consist of point options that are preset. These point options can be warning alarms, on/off switch, barograph display and changeable display. A meter with set point options has the capability to create control limits or establish points for procedural parameters such as speed, temperature, pressure or humidity. In a heating function, the unit transmits an off control signal when the set point temperature has come within reach or surpassed it, and an on control signal when the temperature plunges lower than the set point.

Control (on-off), linear (proportional, PID) or other non-linear power equipment can be utilized to produce the control signal. A panel meter incorporating a power on/off control possesses the capability to transmit an output signal to activate or deactivate a process unit. The units can range from an oven to a fan and more. The units may employ relays, open aerial transistors or additional technologies. On-off, proportional or limit controls are one of the simplest systems for procedure management.

Inputs to these meters can be one of many types. These inputs comprise but are not limited to, AC voltage, current, and power, DC voltage, current, and power, strain gauge, resistance and temperature. Many meters are configured to recognize numerous inputs and have modifiable displays to go back and forth between these inputs.

Output categories accessible for digital panel meters consist of serial communications, relay outputs and analog outputs. Analog outputs are utilized in applications that necessitate digitally restricted output voltages typically within the range of 10 V or a reduced amount, and at existing levels under 10 MA. The heart of an analog output channel is a digital-to-analog converter (DAC), which converts a digital programming into a voltage level. The output of the DAC is then processed or acclimatized to manufacture the necessary output signal characteristics.




If you are interested in Digital panel meter, be sure to visit http://www.hoytmeter.com/.





This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.

2012年6月8日 星期五

Digital Panel Meters Supply Information


Digital panel meters calculate and demonstrate every variety of procedures and electrical changes, such as force, current, temperature, speed, and voltage in an alphanumeric or numeric organization, frequently as a bar graph. A lot of these displays possess totaling, recording, conditioning and added functionalities.

Display styles of a panel meters can be either alphanumeric or numeric. The Alphanumeric can display numbers and letters both. Numeric can display numbers only. When indicating a panel meter it is imperative to state the number of digits exhibited. Universal character sizes for digits on panel meters comprise 0.37 inches to 0.56 inches, bigger than 0.56 inches and smaller than 0.37 inches.

The most significant factor to take into account when indicating digital panel meters is the measurements. The majority of these meters are constructed to be placed upon a rack or in a panel, so the surface height and width are essential factors.

Some features are common to panel meters. These features consist of point options that are preset. These point options can be warning alarms, on/off switch, barograph display and changeable display. A meter with set point options has the capability to create control limits or establish points for procedural parameters such as speed, temperature, pressure or humidity. In a heating function, the unit transmits an off control signal when the set point temperature has come within reach or surpassed it, and an on control signal when the temperature plunges lower than the set point.

Control (on-off), linear (proportional, PID) or other non-linear power equipment can be utilized to produce the control signal. A panel meter incorporating a power on/off control possesses the capability to transmit an output signal to activate or deactivate a process unit. The units can range from an oven to a fan and more. The units may employ relays, open aerial transistors or additional technologies. On-off, proportional or limit controls are one of the simplest systems for procedure management.

Inputs to these meters can be one of many types. These inputs comprise but are not limited to, AC voltage, current, and power, DC voltage, current, and power, strain gauge, resistance and temperature. Many meters are configured to recognize numerous inputs and have modifiable displays to go back and forth between these inputs.

Output categories accessible for digital panel meters consist of serial communications, relay outputs and analog outputs. Analog outputs are utilized in applications that necessitate digitally restricted output voltages typically within the range of 10 V or a reduced amount, and at existing levels under 10 MA. The heart of an analog output channel is a digital-to-analog converter (DAC), which converts a digital programming into a voltage level. The output of the DAC is then processed or acclimatized to manufacture the necessary output signal characteristics.




If you are interested in Digital panel meter, be sure to visit http://www.hoytmeter.com/.





This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.

2011年11月26日 星期六

Digital Panel Meters Supply Information


Digital panel meters calculate and demonstrate every variety of procedures and electrical changes, such as force, current, temperature, speed, and voltage in an alphanumeric or numeric organization, frequently as a bar graph. A lot of these displays possess totaling, recording, conditioning and added functionalities.

Display styles of a panel meters can be either alphanumeric or numeric. The Alphanumeric can display numbers and letters both. Numeric can display numbers only. When indicating a panel meter it is imperative to state the number of digits exhibited. Universal character sizes for digits on panel meters comprise 0.37 inches to 0.56 inches, bigger than 0.56 inches and smaller than 0.37 inches.

The most significant factor to take into account when indicating digital panel meters is the measurements. The majority of these meters are constructed to be placed upon a rack or in a panel, so the surface height and width are essential factors.

Some features are common to panel meters. These features consist of point options that are preset. These point options can be warning alarms, on/off switch, barograph display and changeable display. A meter with set point options has the capability to create control limits or establish points for procedural parameters such as speed, temperature, pressure or humidity. In a heating function, the unit transmits an off control signal when the set point temperature has come within reach or surpassed it, and an on control signal when the temperature plunges lower than the set point.

Control (on-off), linear (proportional, PID) or other non-linear power equipment can be utilized to produce the control signal. A panel meter incorporating a power on/off control possesses the capability to transmit an output signal to activate or deactivate a process unit. The units can range from an oven to a fan and more. The units may employ relays, open aerial transistors or additional technologies. On-off, proportional or limit controls are one of the simplest systems for procedure management.

Inputs to these meters can be one of many types. These inputs comprise but are not limited to, AC voltage, current, and power, DC voltage, current, and power, strain gauge, resistance and temperature. Many meters are configured to recognize numerous inputs and have modifiable displays to go back and forth between these inputs.

Output categories accessible for digital panel meters consist of serial communications, relay outputs and analog outputs. Analog outputs are utilized in applications that necessitate digitally restricted output voltages typically within the range of 10 V or a reduced amount, and at existing levels under 10 MA. The heart of an analog output channel is a digital-to-analog converter (DAC), which converts a digital programming into a voltage level. The output of the DAC is then processed or acclimatized to manufacture the necessary output signal characteristics.




If you are interested in Digital panel meter, be sure to visit http://www.hoytmeter.com/.





This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.