How to Fit Solid Wooden Flooring

Making sure that your wooden floor is finished and laid correctly, will save you lots of money in the long run.

These 10 key factors must be taken into account when fitting a solid wood floor.

1.Height allowance

2.Sub floor Types

3.Installation methods

4.Skirting

5.Quantity to order

6.Quality and Moisture content of wood on arrival

7.Acclimatization of the wood on site

8.Expansion gaps

9.Direction of boards

10.Maintenance

1. Height allowance: First thing to check is whether the thickness of the new floor you have chosen and the possible addition of a sub base will affect your room in any way. Either by head height on low beams, ceilings or doorways or will it create a step into leading rooms.

2. Subfloor: What is the existing subfloor? In all cases check the moisture level of the sub base. Fit a solid wood floor anywhere near moisture and you are wasting your time and money. Generally all ground floor bases are prone to moisture problems at some time or other, so adequate moisture proofing is essential. First floors are less prone and less precaution is needed. Different sub bases include, concrete, wooden beams, chipboard planks and old floor boards.

3. Installation methods: There are four different methods of installation each one has its own advantages and disadvantages and specific applications. Gluing: used on both concrete and chipboard sub bases where there is an even and clean surface. Can be messy and glue is expensive. Nailing: used on wooden beams, chipboard and old wooden floor sub bases. Excellent long lasting and strong method but a special nailer is required. Floating: the new floor is not attached to the sub base by gluing or nailing but is floated on top of it. For this method you will need to use an underlay that you wooden floor rests upon. Underlays are good in that they provide a moisture and acoustic barrier Sticky membrane: This is similar to floating a floor but the underlay used is sticky on one side. But be warned if you are not experienced in this method of installation it is very difficult, as the sticky side is extremely sticky and of you get the board in the wrong place you will have extreme difficulty in adjusting it.

4. Skirting: is decorative and provides a necessary cover for the expansion gap that you need to leave around your solid wood floor. You can undercut the skirting, remove the skirting and refit it later or fit beading up to the skirting which will cover the expansion gap.

5. Quantity to order: To calculate the quantity of timber to order measure the rooms and calculate the square meters, then you must add a minimum of 5% extra on top of your area to allow for cutting and wastage. It seems like an unnecessary expense, but it is unavoidable. If you have lots of corners and small rooms it is advisable to allow 10%. The last thing you want is to run out and then not be able to get matching timber.

6. Quality and Moisture content of wood on arrival: Due to the popularity of wooden flooring, it has become a very big industry. The benefit of that to you the consumer is that it has become very competitive. So good quality wood is available at cheaper prices, however Do Not necessarily go for the cheapest you can find, for the following reasons. Floors boards have gone through multiple stages of manufacture from being cut down and machined to be kiln dried and finished. All these stages cost money and if the manufacturer has skimped on these to keep his costs down ultimately the quality of the final product will be inferior. Cheap boards that do not fit together or warp are not cheap in the long run. The moisture content of the wood on arrival at you premises should be between 8% and 12%. It is unlikely that you will have a moisture reader, so will be difficult for you to measure this. This is an advantage of using a professional. They can ensure that these factors are correct and it is their responsibility to do so. Make sure they do.

7. Expansion Gaps: This is the big one. In my experience people generally tend to underestimate the expansion and contraction properties of wood. When a floor is on the move and there is no space for it to go into, nothing can stop it. It will buckle itself and it will break walls if necessary for it to expand. Therefore it is vital to leave a gap all around your floor into which the floor can expand, about 15mm is preferable. Please ensure that this gap is consistent all around including doorways.

8. Acclimatization of the wood on site: This is a long debated subject amongst floor fitters and my beliefs are based around natural laws. Acclimatizing wood in a very dry centrally heated room during winter is going to give you problems as it expands in the summer months and conversely putting wood on site in summer months with all the windows and doors open is going to give you big gaps in the winter months as the wood contracts. Likewise there is no point in acclimatizing wood at any time of year on a building site as this is not the environment that the wood will always live in.

So what does one do - Well these are the ideals: wood arrives from the factory at between 8% and 12% and the ideal humidity of a room for wooden floors is between 40% and 60%. Keep within these ranges when you fit your floor and keep the room at this humidity and you will never ever have a problem with you floor. Hiring a professional takes this worry away from you, but ensures that your professional gives you a guarantee on his workmanship. In doing so he is stating he is comfortable with his level of skill and knowledge.

Fitting engineered floors certainly does negate a lot of these problems as they do not expand or contract to nearly the same degree as a solid wood floor.

9. Direction of boards: There is no right or wrong here. And it is generally a matter of taste, but there are a few guidelines. If you are fitting onto existing rafters or batons you do not have a choice as the boards have to run at 90 degrees to the rafters. General rule of thumb is to run the boards away from the door leading into the room. Looking down the length of the board tends to make the room look larger. Boards running cross ways tend to be jarring to the eyes. Likewise run boards along the longer length of the room, for instance a long hallway with the boards running across the short length looks strange. If in doubt and if you are a little bolder try going diagonal it has a great affect.

10. Maintenance: Methods used will vary according to the type of finish you have. Suffice to say that a little ongoing maintenance will save you a lot of effort and money down the line. Wooden floors are very practical and very easy to keep clean and looking great, but do not just ignore them once you have fitted them. Follow the advice from your layer or wood supplier.

The author of this article is a Director of Whittlewoods ltd, one of the leading wooden floor companies in the UK. He has over 25 years experience in the timber industry and understands everything about wood. Have a look at the company's website Whittlewoods Oak Flooring you will most probably find the answers to all your Wooden flooring questions right there.

This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.